How To Reset Maintenance Light On Toyota Camry 2009
How To Reset Maintenance Light On Toyota Camry 2009. Read the following steps through before you attempt to reset the light. Continue to hold the odometer button for 10 seconds.
Maintenance checklist at 50,000 miles. Use the trip button on the instrument cluster to set the middle readout to trip a. If done correctly, the maintenance light should flash and you may hear a beeping.
Quickly, Push And Hold The Odometer Button Your Dashboard, Then Turn Your Key To Position Two.
Ensure that the vehicle is set to trip a to reset the maintenance light. However, you can still reset the maintenance required light on a 2009 camry by following these steps: Video shows you how to reset turn off the oil maintenance light (maint reqd) on a 2006 2007 2008 2009 toyota camry.
That Should Turn Off The Maintenance Light On Your Toyota Camry.
Toyota equipped the 2009 camry hybrid with a system to alert the driver, via a maint light, that the vehicle needs maintenance, such as an oil change. Continue to hold the reset button until the odometer displays “000000” and/or the maint reqd light goes off; Press the odo/trip reset switch knob until “trip a” appears.
Only Hondas Have An Oil Life Reset.
Some models don’t have the odo/trip button. If done correctly, the maintenance light should flash and you may hear a beeping. Engine oil, oil filter, tire rotation, etc.)
Read The Following Steps Through Before You Attempt To Reset The Light.
This is how you turn off the maintenance light on a prius. Turn the ign switch to on. Maintenance checklist at 50,000 miles.
Touch The Desired Item In Which You Need To Reset (I.e.
Turn the vehicle off and back on to confirm reset was accepted; On the navigation screen, press info or setup; Continue to hold the odometer button for 10 seconds.